Techincal parameter
A drum diameter:570mm
B drum diameter:280mm
Mixing ratio ： 7:1-14:1
The hydraulic system:
The scope of work pressure:8~14 Mpa
Electric power:1.5kw
Pneumatic system: the scope of work pressure: 0.4~0.6Mpa
Electric source ： 380V 50HZ
Power ： 4KW
Sealant ： silicon/polysufide/polyurethane
Dimension:950*1250*1850mm
Structure
The equipment from A, B plastic pumps, hydraulic systems, pneumatic systems, lifting bodies, such as rack and control box components.
As follows:
1 .Glue pump: A 、 B group have their pump respectively,drived by hydraulic cylinder, and make movement back and forth.then inhaling glue and make it out..A,B gule pump is connected with pressing glue and glue palte,then link together with the rack. 2 .A,B ratio of the components separately control A,B groups to achieve.The range of glue amount is bif,also easy operation
3 、 hydraulic system: A, B driving force comes from the hydraulic system, A, B group are located in a plastic pump air movements, movements of the body by two cylinders of parallel and Beams through the body of their respective fixed link, one of its purposes is to be closed to the surface through the press of two-cylinder.The pressure from the size of adjustment clamps.: Second, when the need for plastic barrels, the cylinder Pressure can be set against. Leave the plastic barrels, to replace the new plastic barrels.
4 .T he control box: it have electronic, hydraulic, pneumatic and electrical components, control switch is on the panel.
l
|
|
|
|
Product Image
|
